Scythe 26" Flying Wing

By lazd on Apr 11, 2017

11  271  2

This is my first wing. Built using the kit from FPVHQ, but with a more modern ESC and motor combination.

231g dry and 327g all up with a 3S 1000mAh.

Maiden

Rescue

Photos

Part List

Frame

Scythe 26"
Crashtesthobby.com
See Site

ESCs

EMAX Bullet 30a BLHeli_S D-Shot ESC (6 builds)
Rotorvillage.ca
$14.99

Motors

EMAX RS2205S 2600kv Brushless Motor (13 builds)
Fpvheadquarters.com
$19.99

Propellers

HQProp 4045 Bullnose
Fpvheadquarters.com
$3.80

FPV Camera

RunCam Swift Mini FPV Camera (44 builds)
Fpvheadquarters.com
$34.99

FPV Transmitter

Eachine VTX03 Super Mini 5.8G 72CH 0/25mW/50mw/200mW Switchable FPV Transmitter (426 builds)
Banggood.com
$12.22

Antenna

FuriousFPV 48mm Micro U.FL Antenna - Ultra Small - Ultra Clear (3 builds)
Pitchrollyaw.net
$12.99

Receiver

FrSky X4R Receiver
Fpvheadquarters.com
$14.99

Batteries

Turnigy nano-tech 1000mAh 3S 45~90C Lipo Pack
Hobbyking.com
$13.54

Radio

FrSky Taranis QX7S 2.4GHz RC Transmitter - Carbon or Blue (50 builds)
Racedayquads.com
$184.99

Goggles

Fat Shark Dominator HD3 Core FPV Goggles (70 builds)
Getfpv.com
$399.99

HD Camera

GoPro HERO6 Black (9 builds)
Getfpv.com
$399.99

HD Camera

GoPro HERO5 Session (196 builds)
Getfpv.com
$199.99

Misc Parts

2 x EMAX ES08MA II 12g Mini Metal Gear Analog Servo
Fpvheadquarters.com
$13.98

Video Receiver

ImmersionRC rapidFIRE w/ Analog PLUS Goggle Receiver Module (144 builds)
Getfpv.com
$149.99

Battery Charger

ISDT SC-608 150W 8A MINI Smart LCD Battery Balance Charger AU Warehouse (9 builds)
Banggood.com
$54.27

Soldering Iron

Weller WESD51 Digital Soldering Station
Amazon.com
See Site
Show stores (9)

Discussion

Sign in to comment

showintellpro   Apr 12, 2017  

I spent like two days building a wing and then it flew for less than 2 minutes before disintegration
From a nose dive. 😭 I got a lot of respect for nicely built wings since I am rubbish at it. Well done!

quadfather_fpv   Apr 12, 2017  

Nice wang!

Guides & Reviews

39 4,068  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,849  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more