Ces 1S "Cinelifter"

By cesfpv on Sep 26, 2024

4 0 2

This is the like 5th Version of my 1S Tiny "Cine-" Quad. The goal was to get a super small 1s quad that carries a naked Runcam Thumb Pro W but also has enough power to have fun while flying.
I started with the Runcam Thumb Pro W on a Mobula 7 and tried to get rid of weight in every Version.
The current Version looks like an Alien. Its build on the Flywoo Firefly 1S DC Frame, but as a Pusher and with 45mm Props (i had to cut them a tiny bit so they dont touch each other).

Update: V5

Switched from 0802 20000kv Happymodel to bigger 1102 22000kv Betafpv Motors. It should gain a bit more torque and thrust.
due to a burned Mosfet i switched the hm Diamond f4 for a Betafpv 5in1 Air AIO.
Redesigned/remixed the Dual Camera Mount to use it with the betafpv c02/c03 Camera. Thanks to my good Friend Mike for the help with the modelling!
switched to nylon screws to save weight. Thanks to Spezilover who was so kind and sent me some additional Nylon Screws together with his Spezilicious65 & 75 RST Frame Kits!

I will do a new Testflight Video soon.

V4:
here is a flightvideo: https://vm.tiktok.com/ZNeKvLygn/

Next Steps: Using Nylonscrews, Design a new Runcam Thumb Naked Case, switch Motors.

The Runcam sits in a badly printed Naked TPU Case that i found on thingiverse. I Cutted some parts off, to save weight and used the Moblite Camera Mount to Mount the FPV Camera.

This thing is still in Progress. I think in the next Versions i will try to strip down the new Runcam Thumb 2 and see how light i can get it.

Here is a testflight but from the previous Version on the Mob7 Frame:

Photos

Part List

Frame	Firefly 1S DC16 Nano Baby Quad V2.0 Frame kit （Analog \ HDZero \ Walks Flywoo.net	$14.99
Flight Controller	Air Brushless Flight Controller (12 builds) Betafpv.com	$44.99
Motors	BetaFPV 1102 22000kv (2022) 1S Whoop Motor I RC-Hangar15, 46,99 € Shop.rc-hangar15.de	See Site
Propellers	Gemfan 45mm-2 Bi-Blade 1.5mm Shaft Propellers - (4CW+4CCW) - Choose Color (2 builds) Pyrodrone.com	$2.49
FPV Camera	Caméra FPV Micro C03 - BetaFPV (3 builds) Drone-fpv-racer.com	See Site
Batteries	LAVA 1S 450mAh 75C Battery (4PCS) (6 builds) Betafpv.com	$21.99
3D Printed	Runcam Thumb Pro mount by 34rwd7 Thingiverse.com	See Site
Misc Parts	BetaFPV BT2.0 U Steckerkabel Pigtail I RC-Hangar15, 1,50 € Shop.rc-hangar15.de	See Site

Show stores (6)

Like Copy Part List Follow cesfpv

Discussion

derekwalters56 Oct 17, 2024

I like your build. I would offer 2 suggestions:

Use the Fractal75 Pro frame which saves about 2 grams over yours, and is made for 45mm props.
Sub the Hawkeye Thumb 4k, use it for the FPV cam and the action cam, it does both at the same time. Then you save another gram with no Nano cam.

cesfpv Oct 19, 2024

Thanks! I will try it with the Fractal Frame. Im not sure about the Hawkeye. I want to lock the ISO and Shutter Speed for the 4K Footage but i dont want that in my FPV Feed. It will also have a bigger Latency than the Nano Cam.

Guides & Reviews

120 22,060 41

Build a 5" Long Range Drone - Transformer Ultralight

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

73 17,609 66

Build a DJI FPV Cinewhoop - QAV-CINE Freybott Edition

Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Guides and Reviews