CarbonCore Cortex X8 Heavy lift.
By Charles Hidalgo on Apr 12, 2017
CARBONCORE CORTEX X8
T-Motor MN 4010-14 370kv
T-Motor carbon props v2 15X5
Maytech 50A esc simonk
WOOKONG M with bluetooth , GPS V2 , IMU V2 (aluminium case)
5.8GHz Video TX's ( one for main camera and one for FPV cam )
FPV camera (with tilt control and OSD )
OPALE rescue parachute
IFLight bet View GIMBAL for GH4 (with zoom and focus option , spectrum RX for second operator )
Carboncore retractable landing gear
Jeti 16 RX
Power hungry power board 5v bec and 12 v bec
Dji OSD MKII
Photos
Wow, now that's an impressive machine. I'd love to see some of the footage you've captured. Do you have a YT channel?
This was used on a few projects where the video cards were all pulled at regular intervals and all the video goes right to the client. That's the way it is on many shoots. Here's a video that might be of interest showing how I ended up having it setup for a single operator using 16 channels. Im using a Frysky Taranis to control the multirotor and at the same time using a module to control spektrum protocol for gimbal control all from one radio. https://www.youtube.com/watch?v=PZhqIrEzEF8&t=2s