50g 3s Hoverbot Nano

By adroc on Apr 12, 2017

6 828 8

Just got this built last night. Still need to tidy up the motor wires & secure both antenna.

Photos

Part List

Frame	Hoverbot Nano Frame (13 builds) Hoverbot.io	$14.99
Flight Controller	FLIP 32 - F3 - OMNIBUS NANO v3 (24 builds) Readytoflyquads.com	$25.99
ESCs	20x20mm Racerstar Mini RS12Ax4 12A Blheli_S BB2 2-4S 4 in 1 Brushless ESC D-Shot Ready (19 builds) Banggood.com	$32.99
Motors	4X Racerstar Racing Edition 1103 BR1103B 8000KV 1-3S Brushless Motor Dark Blue For 50 80 100 Frame Banggood.com	$31.99
Propellers	10 Pairs Racerstar 2035 50mm 4 Blade ABS Propeller 1.5mm Mounting Hole For 80-110 FPV Racing Frame (7 builds) Banggood.com	$6.69
FPV Camera	Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc (23 builds) Amazon.com	$21.98
Receiver	FrSky Ultralight XM Receiver Up To 16CH for RC Drone FPV Racing (71 builds) Banggood.com	$11.99
Batteries	Tattu 450mAh 7.4V 75C 2S1P Lipo Battery Pack with XT30 plug - Long Size (8 builds) Flexrc.com	$7.22
Batteries	Tattu 450mAh 11.1V 75C 3S1P Lipo Battery Pack with XT30 plug (20 builds) Flexrc.com	$11.86
Misc Parts	10X Amass XT30UPB XT30 UPB 2mm Plug Male Female Bullet Connectors Plugs For PCB (2 builds) Banggood.com	$6.29
Misc Parts	Nylon Camera Mount for VM275T (4 builds) Hoverbot.io	$4.99

Show stores (5)

Like Copy Part List Follow adroc

Discussion

morsha Jul 13, 2017

Hi, I bought the same motors and props, but the props spin off. Do you have the same issue?

adroc Jul 13, 2017

You need to screw them in. Also I have tried 5 or 6 different props for this thing and they have all sucked. The racerstar are OK but they break just from looking at them wrong.

Lank May 05, 2017

Which pin did you have to cut to splice in the wires for the Osd. I want to do the same, and I tried with one camera but just get black.

adroc May 05, 2017

For the crazypony the pins are top - video, middle - ground, bottom - power.

Lank May 05, 2017

Hmm that's what I tried, but it didn't work. I probably knicked something. The cam/vtx get really really hot too. I'm sure I've messed something up.

Lank May 05, 2017

For your 4-in-1 esc, did you have to do anything to get current draw on the OSD? I know there can be issues with FC/PDB boards trying to get current to display correctly with 4 in 1s

ferrmium Apr 24, 2017

Do you use OSD of the FC ? If yes, how does it work?

adroc Apr 24, 2017

Yes and it works great. Since its an AIO camera, I had to snip the video connector between the vtx and camera then run the camera to video in and the vtx to video out on the FC.

Guides & Reviews

115 22,060 40

Build a 5" Long Range Drone - Transformer Ultralight

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

69 17,609 65

Build a DJI FPV Cinewhoop - QAV-CINE Freybott Edition

Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Guides and Reviews