https://youtu.be/IxS7rEmtsbM?t=36
I modified the Rekon 10 PRO frame by increasing its height because the VTX did not fit inside.
To achieve this, I replaced all the standoffs with ones that are 5mm longer and designed a 3D-printed mount for the FPV camera plates.
However, I’m not completely satisfied with this VTX, so it’s possible that I will replace it with a regular version of Walksnail, and if I do, I might return the frame to its original height.
At first, I used a ready-made Speedybee stack, but after the initial unsuccessful flights attempts, the original ESC got damaged, so I replaced it with a Mamba 65A Blheli32.
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
New Message for xrazdwa