GEP RC phantom frame with a TuneRC Poly v1.2 AIO on 2s + HGLRC specter 1202.5 11000kv motors + Gemfan hurricane 2512 tri blade props. Currently running a 90% throttle limit.
Camera and VTX are the caddx ant nano camera + flywoo goku vtx625 analog vtx + ORT linear antenna. My friend printed and designed this camera holder to bring the camera forward more and to allow the use of a camera at a 30 degree angle.
I used slightly shorter standoffs which seem to be about 18mm and intend to possibly lower it down to 15mm. This will be intended for building dives and office park flying with 2s batteries to keep it light and safe. total weight rn is 67g. I can lose 2 grams from the battery strap and if i lose the tpu motor protection but i tend to break motors a lot and fly on concrete so I will keep them for now. I will most likely go to a TPU option for a battery strap once i can find a viable choice for a little more weight savings.