Hyphy Noir

By LooseTransistor on Apr 14, 2017

9  197  5

I love the Hyph 5" frame so much for freestyle that I just really really wanted to build another one in 6" configuration, I was looking for a quieter quad with lots of punch and I think the 2205/2300 + DAL T6045 should do the trick.

The murdered out look came from someone commenting on one of my review videos that I soldered a red wire to a ground pad when I was just testing a soldering iron. Being the eternal troll that I am I decided to trigger them a little and run only black wires EVERYWHERE =P

Photos

Part List

Frame

The Hyphy 2xx Frame (5'' or 6'' option) (34 builds)
Readytoflyquads.com
$45.00

Flight Controller

DTFc Flight Controller (Doge)
Rotorgeeks.com
$44.99

ESCs

4 x DYS XSD 30A 3-6S ESC BLHeli_S
Getfpv.com
$67.96

Motors

4 x DYS SE2205 2300KV Brushless Motor – MultiRotorMania (17 builds)
Multirotormania.com
$71.96

Propellers

2 Pairs Tri Blade DALprop T6040 Props
Beaverfpv.com
$4.65

FPV Camera

Foxeer HS1177 XAT600M 5~22V NTSC 2.5mm lens
Droneeclipse.com
$37.99

FPV Transmitter

FX799T 200/600mW Video Transmitter (14 builds)
Newbeedrone.com
$34.99

Antenna

FCModel 5.8 Tx/Rx Racing Antenna (3 builds)
Beaverfpv.com
$12.98

Receiver

Radiolink R9D 9-CH 2.4GHz DSSS Receiver
Getfpv.com
$29.00

Batteries

Bonka Power 1300mAh 4s 75/150C XT-60 (23 builds)
Bonkausa.com
$29.99
Show stores (8)

Discussion

Sign in to comment

stefanm84   Jun 05, 2017  

How do you like the Fcmodel antenna? Is it pretty durable? I have a problem with breaking antennas and came across this one.

LooseTransistor   Jun 13, 2017 

These antennas are literally unbreakable. I have yet to destroy one and I have crashed many many times.

FissionBomb   May 01, 2017  

This quad is too Goth for words.

Guides & Reviews

39 3,793  46
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,654  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more