Make your TinyWhoop fly like a bigger quad with this TinyKwad frame. 20g AUW with lipo. This tiny thing becomes a tinywhoop beast! I will never go fly with ducts again!
Frame |
VD2 (PLA)
Tinykwad.com
|
$3.00 |
Flight Controller |
BeeBrain V2 Micro FPV Flight Controller
Newbeedrone.com
|
$24.99 |
Motors |
NewBeeDrone BDR GOLD Edition - 6mm Brushed Motor
(17 builds)
Newbeedrone.com
|
$14.99 |
Propellers |
Propeller Set - 3 Blade RakonHeli Props 31mm
(20 builds)
Tinywhoop.com
|
$4.99 |
FPV Camera |
Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc
(23 builds)
Amazon.com
|
$21.98 |
Batteries |
NewBeeDrone Nitro Nectar 250mAh 1S HV LiPo Battery
(16 builds)
Newbeedrone.com
|
$15.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Is the 3d peinted hood worth it?
The hood is much worth it. It adds weight which is a bit serious to the weight of a tint whoop, but being ductless, the frame makes it respond a lot better than a traditional tiny whoop frame. The hood adds a lot of durability for the camera. I would suggest trying it without the hood and with the hood to feel things out.
Thanks! One more question. How durable is the pla frame?
It’s a lot less durable than a traditional frame, but people use it for its performance properties. The guy that designed it made a new one with a carbon infused print which never breaks though. It’s a bit heavier but I think it might still fly a lot different and better than a traditional frame.
I decided to order this from shapeways (pro 3d printing service). I am getting it in normal nylon. They wouldnt print the hood for me because they said the walls were too thin. Well, im gonna use a cam mount like the clear one in one of your pics.