Pavo 20 W/axis o4 lite

By SkyBox_fpv on Mar 31, 2025

1  0  0

This was a quick rebuild of a betafpv pavo20. The Air unit was switched from o3 to o4 lite with the Axis flying pcb and camera enclosure for the o4 lite. The enclosure has helped remedy some of the issues experienced on the o4 lite including bending of pcb and ruining specific elements on the board, along with excessive heat build up when quad is not in flight .

All other components are standard for the pavo20. I also found that the added weight from the camera enclosure helped with preventing jello effect. The enclosure fit into the vtx canopy near perfectly, but it does leave it up to you to figure out how to secure it. In this case, I used some .6mm safety wire covered with some heat shrink tool protect the canopy from getting ruined with securing it .

Photos

Like Copy Part List Follow SkyBox_fpv

Discussion

Sign in to comment

Guides & Reviews

117 22,060  40
Build a 5" Long Range Drone - Transformer Ultralight
Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
71 17,609  65
Build a DJI FPV Cinewhoop - QAV-CINE Freybott Edition
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more
Guides and Reviews

Featured Builds

Featured Builds