New try at a Tiny Whoop for my Turnigy Evolution. I'm going to try the E011 for hopefully more power, and the Beecore F3 with included AFHDS 2A compatible receiver for an always lighter build :)
It flies absolutely great!!
Frame |
Eachine E011 Mini 2.4G Headless Mode With 60000RPM 716 Coreless Motor Toy Brick RC Drone Quadcopter
(4 builds)
Banggood.com
|
$15.99 |
Flight Controller |
Eachine Beecore F3_EVO_Brushed ACRO Flight Control Board For Inductrix Tiny Whoop Eachine E010 E010S
(23 builds)
Banggood.com
|
$23.99 |
FPV Camera |
700TVL 1/4 Cmos 1.8mm 170 Degree FPV Camera NTSC/PAL 3.7-5V for RC Drone FPV Racing
(2 builds)
Banggood.com
|
$8.99 |
FPV Transmitter |
Eachine VTX03 Super Mini 5.8G 72CH 0/25mW/50mw/200mW Switchable FPV Transmitter
(417 builds)
Banggood.com
|
$12.22 |
Radio |
Turnigy Evolution Digital AFHDS 2A Radio Control System w/TGY-iA6C Receiver White Mode 2
(11 builds)
Hobbyking.com
|
$65.00 |
Thanks for sharing this build - I have and E011 I've just purchased a new beecore F3 for use with my AFHDS 2A FS-i6s so very pleased to know it all comes together! How do you find the low mounted cam? Looks better protected. I have a TX01 I'm thinking about splitting.
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Looks very nice! I wanna upgrade my e011 with a better board because the range sucks and i wanna fly acro! How did you fit the board on the frame? And could you cover it up with the stock cover?
Thanks :)
The screws are aligned with the frame's screws placement so no worries there.
There was no room to put the cover though... But I don't see the point in the added weight.
Anyway, I've switched over to brushless now, there's no comparison. I'll post my build soon, it's lighter than the E011! :)
Alright, you just got yourself a new