This is a 217 stretch x frame I designed and had cncmaddness cut the carbon. The fc is on the bottom of the main plate with a 4 in 1 on top. It utilizes the Phoenix 3d zoompod. I upgraded my taranis to run lua scripts for pid tuning. Since I enclosed the bottom piece. All parts were conformal coated.
Flight Controller |
Rotorgeeks SSD F3 control board
(12 builds)
Rotorgeeks.com
|
$40.49 |
ESCs |
Spedix IS30 4-in-1, 2-4S LiPo DShot_600 BLHeli_S 30A ESC
(88 builds)
Pirofliprc.com
|
$49.99 |
Motors |
4 x EMAX RS2306 Black Editions RaceSpec Motor 2400KV
(19 builds)
Pirofliprc.com
|
$87.96 |
Propellers |
DAL T5040 V2 Tri-Blade
(45 builds)
Dalprops.com
|
$2.49 |
FPV Camera |
Rotor Riot Special Edition RunCam Swift
(144 builds)
Store.rotorriot.com
|
$39.99 |
FPV Transmitter |
Foxeer TM25 Switcher 25/200/600mW 5.8G 40CH Mini Race Band VTX
– MultiRotorMania
(40 builds)
Multirotormania.com
|
$24.99 |
Antenna |
Menace RC - Raptor Antenna - LHCP
(16 builds)
Readymaderc.com
|
$9.99 |
Receiver |
FrSky XSR 2.4GHz 16CH ACCST Receiver w/ S-Bus & CPPM
(480 builds)
Getfpv.com
|
See Site |
Misc Parts |
Phoenix 3D Solutions
Phx-3d.com
|
See Site |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
So green. I like it!
Haha thanks i like it to