Low riding Jefe

By Notagolf on Apr 29, 2017

13 571 7

This is built on a Jefe frame from John and Rotorious fpv. Having a few issues from some filtering but that should be fixed soon. AUW with battery is about 170 grams. Also i am running the 5000kv motors not 3800kv. This thing rips .

Update. I tried this thing on 4s oly hell sounds like it is tearing the clouds out of the sky fun and fast.

Photos

Part List

Frame	EL RAPIDO JEFE SPARE ARM (SINGLE) Rotoriousfpv.com	$4.00
Flight Controller	FLIP 32 - F3 - OMNIBUS NANO v3 (24 builds) Readytoflyquads.com	$25.99
ESCs	4 x V-Good RC - ARM 32 - 30A Lite ESC Readymaderc.com	$31.96
Motors	4 x RCX H1407 (V2) 3800KV Micro Outrunner Brushless Motor (It's Time to Upgrade Your 1306 Motor) (9 builds) Myrcmart.com	$47.96
Propellers	Team RaceKraft 3030x4 Race Prop Clear 2CW 2CCW (12 builds) Pirofliprc.com	$3.99
FPV Camera	600TVL 1/4 1.8mm CMOS FPV 170 Degree Wide Angle Lens Camera PAL/NTSC 3.7-5V for RC Drone FPV Racing (94 builds) Banggood.com	$7.37
FPV Transmitter	Eachine VTX03 Super Mini 5.8G 72CH 0/25mW/50mw/200mW Switchable FPV Transmitter (417 builds) Banggood.com	$12.22
Receiver	Spektrum - DSMX Quad Race Receiver with Diversity (SPM4648) (108 builds) Readymaderc.com	$24.99
Batteries	Tattu 3S 450mAh 75C Lipo Battery (5 builds) Fpvheadquarters.com	$11.86

Show stores (7)

Like Copy Part List Follow Notagolf

Discussion

Roto_RunnerFPV May 04, 2017

What transmitter would you recommend? (Im new to the hobby)

diddy2k May 02, 2017

What props are shown in your pics? Have you run these motors with those props?

Notagolf May 02, 2017

They are the racekfraft 3076 tri blades they are very amp hungry my batteries were sagging to like 8 volts and i was only getting about 1;30 flight time

diddy2k May 03, 2017

Wow that's crazy pitch. They sure do look good though. I haven't run anything higher than 3035 on my rcx 1407 5000kv motors. The 3045x3 had them making clicking sounds and got pretty hot.

diddy2k May 03, 2017

I'm interested in trying the 3041Q4CS

Whiffles May 01, 2017

Could you potentially fit 4" props on that if you center the battery just right?

Notagolf May 01, 2017

I dont think so but ill check when i get home. The arms are detacheable so mifht be able to design something... talked to designer 4 inch arms way be in the works

Guides & Reviews

115 22,060 40

Build a 5" Long Range Drone - Transformer Ultralight

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

69 17,609 65

Build a DJI FPV Cinewhoop - QAV-CINE Freybott Edition

Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Guides and Reviews