Atmospheric Adventures Ares Mini 2" brushless build
Frame |
Ares Mini - Atmospheric Designs | Atmospheric Adventures
Atmosphericadventures.com
|
$22.99 |
Flight Controller |
Emax STM32F303 F3 Femto Flight Controller with Integrated BEC/Buzzer Pads/VBat/PDB for RC Drone
(10 builds)
Banggood.com
|
$20.99 |
ESCs |
Racerstar 20x20mm RS6Ax4 6A 1-2S Blheli_S 4 In 1 ESC with 5V BEC Dshot600
(22 builds)
Banggood.com
|
$29.69 |
Motors |
Page Not Found - Banggood.com
(9 builds)
Goo.gl
|
$17.50 |
Propellers |
8 Pair DYS 2030 1.5mm Hole 2 Inch 3 Blade Propeller Triblade Bullnose Prop For 1102 1104 1105 Motor
(18 builds)
Banggood.com
|
$3.89 |
FPV Transmitter |
Eachine TX03 NTSC Super Mini 0/25mW/50mW/200mW Switchable AIO 5.8G 72CH VTX 600TVL 1/3 Cmos FPV Camera
(36 builds)
Banggood.com
|
$19.99 |
Receiver |
FrSky Ultralight XM Receiver Up To 16CH for RC Drone FPV Racing
(71 builds)
Banggood.com
|
$11.99 |
Misc Parts |
Emax Femto flight controller base 20mm x 20mm by Emax_USA
Thingiverse.com
|
See Site |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
How did it fly on the 1103 motors? Looks like you upgraded?
Actually downsized, I much prefer the 1103-8000kv motors, it flies GREAT. I started with 1105-5000kv motors. Was going to try and make it 4s, but was just too difficult to find tiny 4s lipo's.
Love your build! Im rebuilding one of the first prototype ares minis today! I'm also building a 2.5mm 2.5-inch Aeolus Mini stretch X and making it 4S capable with 4 Spedix 20A wired to the xt60