Steele Your Face DE Anubis

By ArtimusPrimeFPV on May 10, 2017

4  264  1

Ever since getting into this sport. I was looking for that frame. Previously the DE Shiv was it.. I saw and I had to have it. Well.... GAS runs deep with this one.. Everything about this frame makes sense to me as far as design. So needless to say I had to have it. I wanted this one to be my numero uno. That's number one for you classless assholes who don't understand. Ha. So I decided to go with a few parts I have been pining over. I.e. Steele motors and this frame really.. As soon as Scott Perry over at posted this up with some videos I've been wanting it and same with the Steele motors.. Yeah quasi fan boi.. guilty.. and IDGAF.. Just saying... So I've ordered everything up and am patiently waiting for everything to arrive!!! Please a penny for your thoughts.. Now in saying all of that there were a few things I didn't get this round that really I wanted.. Which was an f4 board... Not that the f3 doesnt cut it as the BF F3 board is my favorite.. But I wanted to try the F4 DYS with the DYS 30a 4in1 esc however the damn esc isn't out yet... Then I thought about the Raceflight board with their 4in1 esc and decided against it because I'm not good enough with BetaFlight tuning to turn around and try and learn something new yet... Also even before that I wanted to go with a Kiss setup but I'm waiting for the pdb and osd combo to hit them streets... SO there will probably be one or two more in my future if it flies as dope as it looks!!! Peace...Also a side note... First one to post a DE Anubis to Kinda cool!


Part List


DE Anubis 5" FPV Racing & Freestyle Frame (3 builds)

Flight Controller

BetaFlight F4 30x30 Flight Controller AIO - BFF4 by FPVMODEL (60 builds)


4 x Spedix ES30 HV 3-6s BLHeli_S DShot600 30A ESCDefault Title (176 builds)


4 x TBS MR STEELE 2345KV SILK (45 builds)


DALPROP T5046C Cyclone (2 CW 2 CCW) (396 builds)

FPV Camera

RunCam Swift 2 Full Size 600TVL CCD FPV Camera w/ OSD (2.1, 2.3 or 2.5mm) - Choose Color & Lens (415 builds)

FPV Transmitter

TBS UNIFY PRO 5G8 HV (RP-SMA) (80 builds)


TBS Triumph Antenna SMA RHCP (Set of 2) (539 builds)


FrSky XSR (480 builds)


Tattu 1300mAh 75C 4S1P lipo battery pack (103 builds)

Misc Parts

Anti-Vibration Motor Pads

Misc Parts

Reciever Antenna Tube (1 piece 12") (3 builds)

Misc Parts

4 x Textured Aluminum Stand Off (3 builds)
Show stores (5)


Sign in to comment

ftj_85   Jun 04, 2017  

wow thats sexy build..great job im hoping the spedix 30 esc will do alot better than my dys xs30 that keep burning up on 5s

Guides & Reviews

27 2,034  27
22 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,804  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more