iFlight iX5: Full DYS Build, DYS F4 V2 FC, DYS 4in1 20A D-Shot 600 ESC, DYS SE2205 2300KV Motors, TBS Unify Pro V2 VTX. Foxeer HS1177 w/ GoPro Lense. Super light and clean stack.
Frame |
iFlight RACER iX5 200mm FPV Racing Quadcopter Frame Kit
(13 builds)
Iflight-rc.com
|
$29.99 |
Flight Controller |
DYS F4 V2 OMNIBUSF4 2-6S LiPo Multicopter Flight Controller w 3.3V Pads - Heli-Nation
(142 builds)
Heli-nation.com
|
$35.99 |
ESCs |
DYS F20A 4in1 20 Amp D-Shot ESC
(22 builds)
Multirotormania.com
|
$38.99 |
Motors |
4 x DYS SE2205 2300KV Brushless Motor
– MultiRotorMania
(17 builds)
Multirotormania.com
|
$71.96 |
FPV Camera |
Mini 600tvl Sony Super HAD CCD FPV Camera
Multirotormania.com
|
$38.00 |
FPV Transmitter |
TBS Unify Pro 5G8 V3 (RP-SMA)
(103 builds)
Team-blacksheep.com
|
$39.95 |
Antenna |
Aomway 5.8GHz 4-Leaf Clover Antenna Set for TX/RX (SMA) (RHCP)
(23 builds)
Getfpv.com
|
$9.99 |
Receiver |
Flysky X6B 2.4G 6CH i-BUS PPM PWM Receiver for AFHDS i10 i6s i6 i6x i4x Transmitter
(188 builds)
Banggood.com
|
$12.99 |
Do you have to wire power from the esc to the fc or does it go throught the pins? And if it goes through the pins does it supply full battery voltage for the osd?
Did you drill out the holes on the Flysky x6b RX?