THE PANDA MULTIROTOR X-220. This is one of my custom designs it's a 220 true x frame. 6 piece so 4 individual arms and 2 sandwich plates. I'm using the shendrones facegrabber pod printed by Phoenix 3d, he does amazing work with tpu.
Flight Controller |
30 AMP Simonk 30A Brushless ESC firmware w / 5V 3A UBEC Quad Multirotor APM2 1G7 4894462326060
(68 builds)
Ebay.com
|
$3.62 |
ESCs |
4 x DYS XSD 30A 3-6S ESC BLHeli_S
Getfpv.com
|
$67.96 |
Motors |
4 x HyperLite V2 Team Edition 2205-2522
(13 builds)
Pirofliprc.com
|
$55.96 |
Propellers |
DAL T5040 V2 Tri-Blade
(45 builds)
Dalprops.com
|
$2.49 |
FPV Camera |
RunCam Swift 2
(202 builds)
Shop.runcam.com
|
$44.99 |
FPV Transmitter |
FPV Ninjas 200mW 40 Channel 5.8GHz FPV VTX with Raceband - The Racer PRO - Pigtail with Right Angle SMA
(7 builds)
Fpvninjas.com
|
$24.99 |
Receiver |
FrSky XM+ SBUS Mini Receiver
(1149 builds)
Getfpv.com
|
See Site |
Power Distribution |
Matek Systems PDB-XT60 W/ BEC 5V & 12V 2oz Copper for RC Drone FPV Racing Multi Rotor
(139 builds)
Banggood.com
|
$4.69 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
what cnc router you are using ? I want to start making prototypes as well
I wish i had a cnc but i just send my deaigns to cncmadness and have them cut totally a shot in the dark with every frame.
what software you would recommend to use for designing frames ?
I just use the free version of qcad