Here is a mini racer 100mm made of polycarbonate equipped with brushless 0703 1S version 20.000kv.
This mini quad is very fast for 1S and very resistant (thanks to the polycarbonate).
This frame has been designed to protect the entire brushless which are very fragile in 0703 without harming the cooling thanks to the passage of air in the frame
There are two chassis versions, a soft Mount TPU 1mm version that greatly reduces vibration and distortion in the brushless.
With brushless it is full power! Especially from 12.000 kv to 20.000kv.
Fullly equipped (camera 600tvl 25mW, micro buzzer and micro led)
Fasteners: 4X M1.6 in 20mm + mini shrinkable sleeve to avoid circuit courts
To avoid vibrations, please use the soft mounts made with TPU and designed to
Let the air pass and cool the engine otherwise you could also damage the motors.
Frame |
Micro Quad fpv Racer 100mm Brushless 0703 1S 20.000kv by Microdure
Thingiverse.com
|
See Site |
Flight Controller |
tinyFISH F3 16x16 Flight Controller 1S-2S with Built-in FrSky Receiver (1.7g!)
(3 builds)
Airbladeuav.com
|
$22.99 |
ESCs |
tinyPEPPER BLHeli_S 4A 16x16mm 4-in-1 DSHOT ESC
(8 builds)
Readytoflyquads.com
|
$15.00 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
That looks really clean. How does it perform?
Thank you
It is very resistant polycarbonate
The frsky receiver is included in the flight controller
I am working on the 2S verson with brushless gemfan 0806 which are much stronger.