My first Martian II build. I had scrapped my first ZMR250 and used 1/2 the parts on this one. It flies well but is pretty hefty.
Frame |
Martian II 220 220mm 4mm Arm Thickness Carbon Fiber Frame Kit w/ PDB For RC Drone
(90 builds)
Banggood.com
|
$31.58 |
Flight Controller |
X-Racer F303 Flight Controller
(44 builds)
Fpvmodel.com
|
$28.19 |
ESCs |
4 x RMRC - 20A Race Series ESC V2 - Silabs F396
Readymaderc.com
|
$55.96 |
Motors |
4 x Emax RS2205S 2300KV 2600KV Racing Edition Brushless Motor for RC Drone FPV Racing
(164 builds)
Banggood.com
|
$67.96 |
Propellers |
DALPROP T5046C Cyclone (2 CW 2 CCW)
(391 builds)
Pirofliprc.com
|
$2.99 |
FPV Camera |
RunCam Swift 2 (2.5mm lens) - Orange
(411 builds)
Getfpv.com
|
$34.99 |
FPV Transmitter |
Eachine TX526 5.8G 40CH 25MW/200MW/600MW Switchable AV Wireless FPV Transmitter RP-SMA Female
(120 builds)
Banggood.com
|
$12.92 |
Receiver |
FrSky X4R-SB - 3/16 Channel Receiver with SBUS and CPPM without pins
(128 builds)
Getfpv.com
|
$22.49 |
Power Distribution |
RROSD Pro V2
(28 builds)
Redrotorrc.com
|
$10.00 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Were you able to use the camera mounting plate with the RunCam Swift 2? Or do the connectors on the back of the camera get in the way?
Good question. No. I was forced to use the flat mounting plate with provided camera plate on the Martian II. The connectors have no problem reaching my F303 board afterward.