Powerful, but inexpensive quadcopter.
The final build consists of these parts:
- The build is based on the Thor 210 5" TrueX 200mm frame;
- Motors are iF2207 2700kv, hollow shaft, N52 arc magnets, thick wire single layer winding, max thrust 1.5kg;
- Flight controller is the bulletproof Matek F405-OSD, SD, 32/16K gyro;
- ESCs are iFlight 35A 4in1 BLHeli_S DSHOT.
Btw, these two companies Matek and iFlight make top quality circuit boards, very hard to damage by amateur soldering or shorting connectors. - VTX is the stackable PandaRC/iFlight VTX module 25/200/600mW with connection to SBUS for switching channels remotely;
- FPV camera is RunCam Swift Mini 1/3 CCD, 130 degree view camera;
- Props are 5x5x3;
- Battery is Infinity 4S 90C 1300mah.
Photos
Part List
Show stores (4)
Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
With the PandaRC vt5804, how do you change settings via s.bus? I get it's done on channel 6 but I guess I have no idea how to set that up on my Taranis
In the Inputs menu select channel 6 and assign any 2-pos switch to it's source. Then use that switch to cycle through channels 1-8. No other settings can be changed via sbus, frequency band and transmit power can only be selected using the button on the tx board.
Awesome, thank you so much