Purchased this frame from my local hobby shop and it flies great! indestructible! So decided to drop my old DYS 4 in 1 20a with a Fortini F4!
Part List
Frame |
ARES 139MM
Smrfpv.com
|
$49.99 |
Flight Controller |
FORTINI F4 32Khz 16MB Black Box Flight ControllerSKU: FPV-FORTF4
(16 builds)
Furiousfpv.com
|
$39.95 |
ESCs |
DYS F20A 4-in-1 ESC BLHeli_S Dshot
(22 builds)
Getfpv.com
|
$38.99 |
Motors |
2 x EMAX RS1306 4000K Brushless Motor CW
(19 builds)
Getfpv.com
|
$25.98 |
Motors |
2 x EMAX RS1306 4000K Brushless Motor CCW
Getfpv.com
|
$24.00 |
Propellers |
Lumenier 3x4x3 V2 - Propeller (Set of 4 - Transparent Blue)
(3 builds)
Getfpv.com
|
$2.24 |
FPV Camera |
RunCam Swift 2 600TVL FPV Camera Mini 2.3mm for Quad Flying Drones150 Degree OSD WDR DC 5-36V NTSC Integrated MIC for Multicopte
Amazon.com
|
$39.99 |
FPV Transmitter |
AKK X1P 5.8Ghz 25mW/200mW/600mW Switchable FPV AV Transmitter with Pigtail for FPV Racing Drone
(17 builds)
Amazon.com
|
$14.99 |
Antenna |
IBCrazy 5.8 GHz Airscrew Cloverleaf Ultra Antenna (single)
(5 builds)
Getfpv.com
|
$21.99 |
I'm working on a 3" quad using the same motors and props, and I have a question. I can't get the locking nuts to screw onto the motor shafts far enough to actually engage the nylon insert. Did you have any trouble with that?
Not at all. They screwed right on for me.
Who knows. I'm going to run by the hardware store later today and get some shorter M5 nylock nuts and try those out.