Storm Shadow aka Stella

By WishBeatsFPV on Jun 01, 2017

6  281  1

Been hearing about the Chameleon hype train for a minute so I decided to find out for myself. Hopefully this will suit my needs as an FPV Freestyle Fanatic. Since I've been flying 4s for a few years now, I finally pulled the trigger on a 6s capable rig. Running an all DYS Powertrain, TBS FPV setup, and I'll probably run DAL Cyclone Props. Having a full bumper to bumper warranty on this frame sorta feels like buying a GoPro at BestBuy...Confident.

Photos

Part List

Frame

Chameleon (154 builds)
Armattanquads.com
$90.00

Flight Controller

DYS F4 PRO Flight Controller (141 builds)
Fpvheadquarters.com
$37.99

ESCs

4 x DYS XSD 30A BLHeli_S ESC (4 builds)
Fpvheadquarters.com
$55.96

Motors

4 x DYS 2207 Storm 2300 KV Brushless Motor (7 builds)
Fpvheadquarters.com
$71.96

FPV Camera

Foxeer HS1177 IR Block FPV Camera (58 builds)
Fpvheadquarters.com
$39.99

FPV Transmitter

TBS Unify Pro HV 5.8 GHz Video Transmitter (584 builds)
Fpvheadquarters.com
$49.95

Antenna

TBS Triumph 5.8 GHz STUB Antenna - SMA (11 builds)
Fpvheadquarters.com
$39.95

Receiver

FrSky XSR CPPM/S.Bus Receiver (35 builds)
Fpvheadquarters.com
$14.99
Show stores (2)

Discussion

Sign in to comment

npmullins   Jun 23, 2017  

hi can you share a few more pictures on how you have the xt60 attached to the back plate? i have just changed to an allinone fc/pdb, so i have had to feed the power wires through the back but i am worried about it getting pulled on in a hard crash and damaging the fc. Does the xt60 wedge in the space ok?

Guides & Reviews

39 3,806  46
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,660  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more