This is a frame I designed. To compete against the hyperlite floss. It's a modular stretch x with 8mm wide arms. As pictured comes in at 246g.
Frame |
Cavity
(3 builds)
Pandamultirotors.com
|
$44.99 |
Flight Controller |
RMRC Seriously Dodo Flight Controller - Rev 3a
Readymaderc.com
|
$29.99 |
ESCs |
Spedix IS30 4-in-1, 2-4S LiPo DShot_600 BLHeli_S 30A ESC
(88 builds)
Pirofliprc.com
|
$49.99 |
Motors |
4 x HyperLite V2 Team Edition 2205-2522
(13 builds)
Pirofliprc.com
|
$55.96 |
Propellers |
DAL T5040 V2 Tri-Blade
(45 builds)
Dalprops.com
|
$2.49 |
FPV Camera |
RunCam Swift 2 (2.5mm lens) - Orange
(412 builds)
Getfpv.com
|
$34.99 |
FPV Transmitter |
FPV Ninjas 200mW 40 Channel 5.8GHz FPV VTX with Raceband - The Racer PRO - Pigtail with Right Angle SMA
(7 builds)
Fpvninjas.com
|
$24.99 |
Antenna |
Menace RC - Raptor Antenna - LHCP
(16 builds)
Readymaderc.com
|
$9.99 |
Receiver |
FrSky XM+ 2.4GHz Micro ReceiverDefault Title
(1149 builds)
Racedayquads.com
|
$15.99 |
When will these be back in stock on your website? The frame looks fantastic, and it'll be hilarious when i beat my buddy's hyperfloss. :)
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
What would the peice be? Where can I get it?
Im selling them for $60 included 6 arms base plates too plates and all hardware. You can view them at pandamultirotors.com
I dont have any stock yet but can get frames cut to order.