Mike at FPV FlihtClub kindly sent me one of these when he was protyping the frame, in the end he used a different carbon, although I can't think why as I can't break this (touch wood). The frame comes with a built in soft mount for the flight controller, is very light, was the first to use chamfered edges as far as I am aware, and has recessed screws in the bottom so your lipo doesn't get damaged. I switched props to gemfan flash from the racekraft shown in the picture, the thing is very locked in and flies superbly. I had to use a spare arrow mount to mount the swift as the swifts own mint dismal work but I believe this has since been rectified.. pololu is powering fpv kit, everything else is running off the battery voltage or the reg on the fc