Canti - Zuul Superbeast

By MrPistachios on Jul 11, 2017

2  100  0

My Zuul Superbeast has been running for quite a long time, I have replaced several parts and now I decided to get more into acro flying. I really like the GoPro cage as this keeps my GoPro safe from sure destruction. I prefer my GoPro is protected over my flight camera as the swift is much cheaper to replace. This is also why I refer to this quadcopter as Canti which is the tv head robot from FLCL.
The four in one ESC is also the power distribution board and is capable of running Dshot600. I decided to add bullet connectors because the Kiss FC is so sensitive to vibration that everytime I crash and a motor gets bent it causes it to have a twitch in flight. The bullet connectors save me time when swapping motors in the field since I am still practicing to fly acro, once I feel more confident as I am crashing less and less I will probably upgrade motors and direct solder them on.


Part List


ZUUL Superbeast 285

Flight Controller

KISS FC - 32bit Flight Controller V1.03 (180 builds)


Spedix 4 in 1 DShot 600 BLHeli_S 30A ESC (88 builds)


4 x SunnySky X2207S 2100KV Brushless Motor CW - On !


DALprop T5040 V2 Crystal Props

FPV Camera

RunCam Swift 600TVL FPV Mini Camera Top Connector 2.1mm 5-17V 2S-4S IR Blocked Filter For Drone Quadcopter

FPV Transmitter

TBS Unify Pro V3 5.8 GHz Video Transmitter (146 builds)


TBS Triumph-STUB SMA (RHCP 2PCS) (140 builds)


FrSky D4R-II 4ch 2.4Ghz ACCST Receiver (w/telemetry) (14 builds)


Tattu R-Line 4S 1300 mAh 95C Lipo Battery


FrSky Taranis X-Lite (65 builds)


Fat Shark Dominator HD3 FPV Goggles + Free OLED 5.8GHz Rx Module (51 builds)

Misc Parts

Zuul Base Spacer


Think Tank PhotoFPV Session Backpack for Drones (3 builds)
Show stores (9)


Sign in to comment

Guides & Reviews

46 5,098  29
26 days ago

Want to learn how to build an FPV rig? This guide will walk you through your first FPV freestyle build. These parts were hand-picked to balance cost and maximize performance. The TBS Source One is a popular frame for it's low cost, high quality carbon fiber. It's easy to work with and provides more than enough space for your electronics. We've got a 32bit 4-in-1 ESC to bring you the smoothest flights..

Read more
40 5,247  30
Jul 30, 2019

You've probably heard the term "Cinewhoop". Traditionally it's a 3" ducted quad capable of carrying a GoPro Hero7 Black at a low 10 degree angle. More recently the term "Cine" has been applied to a number of RTF quads ranging from 85mm to 3". They all focus on their HD capability, but none compare to the stabilization of Hypersmooth (only available on the Hero7 Black). This is what really offers that..

Read more