Intruder

By TheMrJahn on Aug 12, 2017

22  727  5

I prefer freestyle powerful builds, so i finished one more for my collection. Installed T-Motor F80 1900kv motors and F45 escs. Wanted to use Kakute F4 AIO, but this aio have too small pads for my build (T-Moror F45 ESCs use 14AWG wires), changed it with FuriousFPV FORTINI F4 flight controller and Matek HUBOSD8-SE. Installed BF3.2 (build #66), BlHeli_s16.67RC. Protocol used - DShot600. All components can handle up to 6s. Tested so far with 4s lipos - very smooth flying.

Photos

Part List

Frame

Awesome F200 200mm 4mm Arm FPV Racing X Frame Carbon Fiber & CNC Aluminum Alloy (2 builds)
Banggood.com
$34.99

Flight Controller

FuriousFPV FORTINI F4 32Khz 16MB Black Box Flight Controller - FPV-FORTF4 (16 builds)
Heli-nation.com
$39.95

ESCs

4 x T-motor F45A 45A Blheli_S 2-6S Brushless ESC D-shot 600 In Default support Oneshot Multishot for RC Drone (3 builds)
Banggood.com
$95.60

Motors

4 x T-Motor F80 2408 1900KV 2200KV 2500KV Brushless Motor 2-6S For 220 250 RC Drone FPV Racing Multi Rotor (11 builds)
Banggood.com
$117.00

Propellers

10 Pairs Emax T5050 5050 5x5 BN Propeller CW CCW Red/Yellow/Orange/Green/Blue/Purple for RC Drone FPV Racing (8 builds)
Banggood.com
$9.98

FPV Camera

FOXEER Arrow V3 2.5mm 600TVL 4:3 HAD II CCD PAL/NTSC IR Block Mini FPV Camera Built-in OSD MIC (132 builds)
Banggood.com
$25.40

FPV Transmitter

HGLRC GTX226 5.8G 40CH 25mW 200mW 600mW Switchable FPV Transmitter VTX SMA RP-SMA Female (16 builds)
Banggood.com
$16.99

Antenna

TBS TRIUMPH-STUB 5.8Ghz Antenna (RP-SMA Male / RHCP / 2pcs) (18 builds)
Helipal.com
$44.90

Receiver

Frsky XM+ Micro D16 SBUS Full Range Mini Receiver Up to 16CH for RC FPV Racing Drone (1368 builds)
Banggood.com
$13.69

Power Distribution

Matek Systems HUBOSD8-SE 9-27V PDB W/ STOSD8-SE 5V&10V Dual BEC For RC Multirotors - Heli-Nation (2 builds)
Heli-nation.com
$16.99

Misc Parts

5 Pcs AMASS XT60+ Male Plug Connector 14AWG 10cm Power Cable Wire (10 builds)
Banggood.com
$7.13

Misc Parts

LANTIAN NAZE32 F3 Super Loud Beeper 5V Buzzer Tracker For RC Racer Drone (20 builds)
Banggood.com
$3.98

Misc Parts

O-Rings (2mm x 6mm / 40pcs) (4 builds)
Helipal.com
$2.90

Misc Parts

1PC Realacc 45 Degree Antenna Adapter Connector SMA RP-SMA For RX5808 Fatshark Goggles RC Drone (10 builds)
Banggood.com
$1.89
Show stores (3)

Discussion

Sign in to comment

UnderDawg   Aug 14, 2017  

Awesome build!! Looks like a tight fit for the camera and VTX..

Currently   Aug 14, 2017  
1

it looks alot like the frog frame. Love the colors too!

TheMrJahn   Aug 14, 2017 

It was hard to fit all parts in this frame...

DustyAir   Aug 12, 2017  
1

That's a pro looking build dude. Awesome work!

TheMrJahn   Aug 13, 2017 

Tnx, man!

Guides & Reviews

27 2,075  29
23 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,826  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more