Spyderbyte FeatherMod

By rotorvillage on Jul 22, 2017

5  165  5

Originally a Spyderbyte190 frame, however the larger top pod has been removed, 4" prop arms replaced with 5".

A big shout out to Tattu for the motors, esc's & batteries for this rig.

Photos

Part List

Flight Controller

Lumenier LUX V2 Flight Controller (60 builds)
Getfpv.com
$24.99

ESCs

TATTU BLHeli_S 30 AMP ESC (2-5S, w/Dshot, No BEC) for FPV RC model (4pcs) (11 builds)
Genstattu.com
$67.96

Motors

Tattu 2305 2450KV Brushless Quadcopter Motors (Set of 4) (5 builds)
Genstattu.com
$75.96

Propellers

Gemfan 5152 Tri-Blade Prop (2CW+2CCW) (2 builds)
Rotorvillage.ca
$3.99

FPV Camera

RunCam Micro Swift FPV Camera (10 builds)
Rotorvillage.ca
$41.99

FPV Transmitter

TBS Unify Pro 5G8 HV (SMA) 25-800mW (4 builds)
Rotorvillage.ca
$65.99

Antenna

TBS Linear Antenna (Unify Pro 5G8) (6 builds)
Rotorvillage.ca
$9.99

Receiver

Flysky X6B 2.4G 6CH i-BUS PPM PWM Receiver for AFHDS i10 i6s i6 i6x i4x Transmitter (175 builds)
Banggood.com
$11.06

Batteries

Tattu R-Line 1550mAh 4S 95C Lipo XT60 (3 builds)
Rotorvillage.ca
$52.99

Power Distribution

Matek Mini Power Hub w/ BEC 5V & 12V
Rotorvillage.ca
$11.99

Misc Parts

30.5mm Stack Plate - Polycarbonate
Rotorvillage.ca
$4.99

Misc Parts

M3 x 8mm Purple Textured Stand-off (10pk)
Rotorvillage.ca
$3.99

Misc Parts

Lumenier Medium Lipo Strap
Rotorvillage.ca
$3.99

Misc Parts

Nighthawk-X Parts - LiPo Protection Plate
Rotorvillage.ca
$3.99

Misc Parts

M3 x 8mm Blue Anodized Screw (8pk)
Rotorvillage.ca
$2.99

Misc Parts

M3 x 15mm Blue Textured Stand-off (4pk)
Rotorvillage.ca
$2.99

Misc Parts

Voltage Capacitor - 220uF 35v
Rotorvillage.ca
$1.99

Misc Parts

5V Buzzer
Rotorvillage.ca
$0.89
Show stores (4)

Discussion

Sign in to comment

Quadropus   Aug 17, 2017  

Hey, I have received my Tattu 2305 today. I tried to remove the bell but it seems like it is glued in place :D The C-clip also seems to have no direct effect on the fit of the bell since the clip is quite loose. What is your experience on that?

rotorvillage   Aug 17, 2017 

Mine seem a-ok. But I haven't needed to remove a bell yet either.

Quadropus   Aug 17, 2017 

Okay thanks for the response :)

BlackbirdFPV   Jul 22, 2017  

How do you like those Tattu motors? Do they Rip?

rotorvillage   Jul 23, 2017 

They sure do! So far I'm liking them!

Guides & Reviews

39 3,807  46
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,662  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more