ZMR 250

By garogat on Jul 26, 2017

2  229  0

Nice little standard racer. Able to fly 3s or 4s.

Photos

Part List

Frame

ZMR250 V2 Carbon Fiber Frame Kit 4.0mm Arm Thickness Support 1806 2204 2206 Power (14 builds)
Banggood.com
$24.99

Flight Controller

Betaflight F7 Pro Flight Controller w/Dual Gyro OSD Blackbox Barometer Current Sensor (22 builds)
Hobbyking.com
$45.00

ESCs

4X Racerstar RS30A V2 30A Blheli_S ESC OPTO 2-4S Support Oneshot42 Multishot 16.5 Dshot600 for RC Drone (89 builds)
Banggood.com
$53.57

Motors

4X Racerstar Racing Edition 2205 BR2205 2300KV 2-4S Brushless Motor For QAV250 ZMR250 RC Drone FPV Racing (76 builds)
Banggood.com
$27.99

Propellers

2 Pairs Gemfan 3025 PC Propeller CW/CCW For 1104 Motor 120 150 160 RC Drone FPV Racing Multi Rotor (32 builds)
Banggood.com
$1.99

FPV Camera

Kondensator 1000 µF 25V low ESR 1 STCK. Die guten !! Panasonic FC Serie (8 builds)
Ebay.com
$1.48

FPV Transmitter

Eachine TX526 5.8G 40CH 25MW/200MW/600MW Switchable AV Wireless FPV Transmitter RP-SMA Female (122 builds)
Banggood.com
$14.92

Antenna

AOMWAY 5.8G 3dBi RP-SMA Male Four Lobe RHCP VTx/VRx FPV Antenna (59 builds)
Banggood.com
$9.90

Receiver

FrSky D4R-II 2.4G 4CH ACCST Telemetry Receiver for RC Drone FPV Racing (24 builds)
Banggood.com
$26.42

Batteries

Turnigy 2200mAh 3S 25C Lipo pacote (4 builds)
Hobbyking.com
$11.46

Batteries

Tattu 1550mAh 45C 4S1P Lipo Battery Pack with XT60 plug (2 builds)
Genstattu.com
$20.34

Power Distribution

Matek FCHUB-6S Hub Power Distribution Board 5V & 10V BEC Built-in 184A Current Sensor for RC Drone (91 builds)
Banggood.com
$9.99

HD Camera

GoPro HERO4 BLACK
Amazon.com
$262.00
Show stores (5)

Discussion

Sign in to comment

Guides & Reviews

29 1,565  11
25 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
44 5,031  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more