My favorite video game series main antagonist inspired. This is a Tokio (true X) build with F-40 Pro's and named Virgil.
Frame |
FlightClub Tokio X Race Frame - FPV FlightClub
(11 builds)
Fpv-flightclub.com
|
$60.00 |
Flight Controller |
Lumenier LUX V2 Flight Controller
(59 builds)
Getfpv.com
|
$20.25 |
ESCs |
Cicada 33A 4 in 1 Dshot 600 BlHeli_S ESC for FPV RACING
(4 builds)
Taco-rc.com
|
$52.99 |
Motors |
4 x T-Motor F40 Pro Race Motor
(6 builds)
Store.fpv-flightclub.com
|
$100.00 |
Propellers |
4 x Gemfan 5152 3-Blade Propeller (2cw - 2ccw) - Blue
(11 builds)
Helidirect.com
|
$13.16 |
FPV Camera |
Foxeer Arrow V3 w/2.5mm lens
(2 builds)
Rotorgeeks.com
|
$38.90 |
Antenna |
Lumenier AXII Stubby 5.8GHz Antenna (LHCP)
(15 builds)
Getfpv.com
|
$9.99 |
Receiver |
FrSky XSR 2.4GHz 16CH ACCST Receiver w/ S-Bus & CPPM
(480 builds)
Getfpv.com
|
See Site |
Batteries |
TATTU R-Line 1550mAh 4s 95c Lipo Battery
(81 builds)
Getfpv.com
|
$37.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Hey this looks great! Where did you get the blue 3D printed pod though... I want one!
Hey JFPV, the blue Tokio canopy that were 3D printed were the first 2 batches that the guys at FPV-Flight club ran. Unfortunately, as far as I know, Mike over there has no intention of making the 3D printed canopies anymore. That said, his injection molded versions should hit his website any day now. It's unfortunate tho since the colors on the injection molded parts tend to look more flat instead of shiny (like in the printed blue version version I have here). Also, I thought the 3D printed Orange and red colors he had before looked great now it looks like basic chalk :/ When the injection molded parts are available I intend to get one free and I'll try to post that new one on here to compare the different looks for everybody else to have a better idea of what to buy for themselves.