I really like the DYS 30A 4in1 ESC and DYS F4 Pro Flight Controller combo, and I had a couple of hours to kill, so I pulled a Hyperlite EVO HD 5" frame down off the shelf and started the build. There is really a lot of available space on this frame, so fitting the remainder of the electronics was a breeze.

For the transmitter, I decided on the Lumenier TX5G2R 200mW with Raceband (Pigtail SMA), and added a 50mm EMAX Pagoda 2 5.8G Omni antenna. The frame comes with a convenient mounting hole, allowing you to side-mount the antenna for a really clean look. The VTX pigtail routes nicely to the underside of the 50mm antenna.

The DYS SE PRO 2205 2550kV Motors come with plenty of black wire, and I love the way these motors perform in flight. Very quiet and powerful. I mounted up the motors, then soldered the wires from the motors to the DYS 30A 4in1 ESC.

Camera duties are handled by a RunCam Swift2 with 2.5mm lens.

Since the camera is orange, and the frame came with orange standoffs, I decided to go with a set of orange DalProp Cyclone T5046C Propellers. You can never have enough orange, so I topped off the build with an orange Foxeer battery strap.

This was one of the easier builds I have ever done, and everything went together smoothly.