DYNAMIX - THE ULTIMATE FPV RACE FRAME (5")

By Quadxl on Aug 08, 2017

3  176  2

Finally got some slot to renovate my Dynamix Super frame. Now with a DYS F4. Wasn't so easy to get that in there. I just love this frame!

Photos

Part List

Frame

Dynamix - The ultimate FPV race frame (5")
Airpixfpv.com
$59.99

Flight Controller

DYS F4 Flight Controller (Poker Face) (141 builds)
Getfpv.com
$38.99

ESCs

4 x Cobra - 30a BLHeli_S/DSHOT - ESC
Readymaderc.com
$55.96

Motors

4 x Cobra CP-2205-2300 Champion Series Multirotor Motor (6 builds)
Getfpv.com
$75.96

Propellers

DAL T5050C Cylcone Tri-Blade
Dalprops.com
$2.29

FPV Camera

RunCam Swift Mini (3 builds)
Shop.runcam.com
$34.99

FPV Transmitter

Rush VTX V1.1 5.8G 40CH Switchable (25~500mw)
Helipal.com
$29.90

Receiver

FrSky XSR 2.4GHz 16CH ACCST Receiver w/ S-Bus & CPPM (480 builds)
Getfpv.com
$14.99

HD Camera

GoPro HERO5 Session (267 builds)
Getfpv.com
$199.99
Show stores (6)

Discussion

Sign in to comment

Carbon_Rob   Aug 08, 2017  

I think you've got a couple of props upside down.

Quadxl   Aug 09, 2017 
1

Good catch!

Guides & Reviews

24 1,187  11
16 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
42 4,804  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more