Wow...what's need to say? Its a amazing little freestyle beast!!!
The build was one of the easiest builds I ever done, carbon parts fit nice and with the Revobee32 cube its super fast soldering action.
Only issue had was some oscillations cause of the mpu6050 on the Revobee. I replaced the nylon m3 nut on the under site of the esc layer with some m3 rubber rings and put some on the each side of the FC.
After this it was just perfect. Running on Betaflight 3.1.7 with 8/8 and stock pids.
Frame |
AirBlade Eclair 3K Carbon Fiber Frame Kit V2
(30 builds)
Airbladeuav.com
|
$22.99 |
Flight Controller |
iFlight Mini Revobee32 F4 32K FPV Flight Tower System 18A ESC
(4 builds)
Airbladeuav.com
|
$79.99 |
Motors |
4 x RotorX RX 1105B 6500kV Beast Mode
(7 builds)
Airbladeuav.com
|
$59.96 |
Propellers |
RotorX RX 2535 Props (8 CW & 8 CCW)
(27 builds)
Airbladeuav.com
|
$7.98 |
FPV Camera |
RunCam Micro Swift 2 FPV Camera CCD
(282 builds)
Airbladeuav.com
|
$34.99 |
FPV Transmitter |
Eachine VTX03 Super Mini 5.8G 72CH 0/25mW/50mw/200mW Switchable FPV Transmitter
(417 builds)
Airbladeuav.com
|
$14.99 |
Receiver |
FrSky XM+ SBUS Mini ReceiverDefault Title
(1149 builds)
Airbladeuav.com
|
$12.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Thanks for sharing the build. I also want to build a similar one.
One question: is the PDB included with the frame ? I mean, the board where the battery connector goes.
I've checked a lot of builds and none mentions any PDB. Is it included in the revobee FC ?
Thanks!