WOOF WOOF

By Bendi on Sep 03, 2017

2 466  11 

DMR Doberman 5" Stretch..

Got the frame and motors from Drone Drop (https://droneboxdrop.com/) and all other parts from Pyro Drone (http://pirofliprc.com/). 3D printed parts from Brain3D (https://www.brain3d.co/)

Don't mind or laugh at my side cap. It will probably be ripped of by a gate tomorrow.. Had to mount the 4-1 ESC sideways so all wires could fit.

Photos

Part List

Frame

Doberman 5" Stretch – Detroit Multirotor Company (5 builds)
Detroit-multirotor-company.myshopify.com
$60.00

Flight Controller

Airbot Omnibus F4 Pro V3 (SmartAudio V2 VTX Control) (Current Sensor) (41 builds)
Fpv303.com
$36.99

ESCs

Spedix IS30 4-in-1, 2-4S LiPo DShot_600 BLHeli_S 30A ESC (44 builds)
Pirofliprc.com
$49.99

Motors

4 x ZMX Fusion X20 2205-2522KV (7 builds)
Silver-drone.com
$63.96

Propellers

5" Triple Blade Propeller 5051TCS (Triple Crane Style) (3 builds)
Racekraft.com
$3.99

FPV Camera

Foxeer Arrow Micro V2 FPV Camera Built-in OSD Plastic Case - IR Block - NTSC (16 builds)
Pirofliprc.com
$26.90

FPV Transmitter

TBS UNIFY PRO 5G8 HV - RACE (SMA) (272 builds)
Pirofliprc.com
$19.95

Antenna

Lumenier AXII 5.8GHz Antenna (RHCP) (2pcs) (61 builds)
Getfpv.com
$39.99

Receiver

XSR-M FRSKY Receiver (15 builds)
Racedayquads.com
$19.49

Batteries

Tattu R-Line 4S 1300 mAh 95C Lipo Battery (55 builds)
Fpvheadquarters.com
$37.65

Misc Parts

Unify Pro Mounting Board (9 builds)
Whitenoisefpv.com
$5.95

Misc Parts

RX Antenna Tube holder (For Standoffs)
Brain3d.co
$5.00

Misc Parts

Forever Tubes (Black Caps Included) (3 builds)
Brain3d.co
$3.00

Misc Parts

Panasonic Electronic Components
Digikey.com
$0.64
Show stores (11)

Discussion

Sign in to comment.
Whiffles   Sep 03, 2017  

Nice looking build. How's the Arrow Micro?

Bendi   Sep 03, 2017 

Thanks.

I've only tested the camera on the bench, but from what I can tell there is no difference between my Foxeer Arrow v3, and my Runcam Swift 2 on my other builds. The micro has 650tvl resolution, whereas the foxeer arrow v2 has 600tvl. They both use the same sony super had 2 sensor. So if anything, the micro is a little better.. I can't tell if the latency is better or worse.. Seems like a great little camera though.

Gear Reviews

3 555 
By Whiffles 27 days ago

The EV100 Micro AV Recorder is a DVR for the Eachine EV100 headset. Eachine should have built this into the headset, but here we are. It's about the size of a matchbook and works quite well despite a short learning curve. It's powered by the same battery included with the EV100 and uses the white balance lead. Other than that you can use either of the included 2.5mm to 3.5mm cables to plug it into the video input/output port of the EV100. You can either strap it beside the battery in the headstrap or use the included double sided tape to mount it to the top of the goggles. Vs the Eachine ProDVR This is obviously a repurposed Eachine ProDVR, but it does simplify the design. The ProDVR has different pins for each input and output. In fact the entire side of the unit is dedicated to various keep reading..

9 2,032 
By Whiffles Sep 29, 2017

Currently on sale for $97, EV100 at Banggood The much anticipated Eachine EV100 headset has finally arrived! Opinions have been quite polarized and unless you've never flown FPV before you're likely to find fault in the field of view (FOV). I've tried a number of headsets and have to admit that I've been spoiled by the FatShark HD2 and HD3 goggles. That being said this is nowhere near that price bracket, so I'd like to compare the EV100 to a few headsets around the same price. Keep in mind that these cost $100 when they were released, so the current $159 price is likely to come down. EV100 vs the Competition I've been a long supporter of the Eachine EV800. It's a great headset for the price (~$55). Feature for feature it's the most comparable headset to the EV100. Both include a keep reading..

Are you sure you want to unfollow this person?
Are you sure you want to delete this?
Click "Unsubscribe" to stop receiving notices pertaining to this post.
Click "Subscribe" to resume notices pertaining to this post.