The frame is roughly cut and sanded to a smooth shape from a 1mm sheet of carbon fiber using a Dremel: http://donkey.vernier.se/~ghlargh/temp/frame.pdf
Funny thing, the frame in the picture is 104mm since i didn't uncheck "scale to fit" when printing and only realized after cutting and drilling everything. The standoffs between frame and ESC are at a little bit of an angle but otherways it works.
All plugs and jacks are removed and all connections soldered using AWG30 silicone wire except the battery which has a connector and AWG20 wire.
The buzzer will be replaced with a much smaller one suggested by Reddit user AMysticalAlliance.
Part List
Show stores (3)Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
New Message for ghlargh