My son and I are building our first FPV quadcopter. I have flown RC for many years, he has flown a little. There are so many parts available to build, we picked a frame and ran with it. Will add pics as it comes together and as we get the parts in the mail.
Frame |
RMRC Goby 210
(11 builds)
Readymaderc.com
|
$25.99 |
Flight Controller |
Flip 32 - F3 V2 (128Mb Flash)
(16 builds)
Readytoflyquads.com
|
$19.00 |
ESCs |
4 x 20A LittleDevil ESC BLHELI-(ONESHOT)
(2 builds)
Readytoflyquads.com
|
$36.00 |
Motors |
DYS - SE2205-2300KV - 1 CW / 1 CCW
Readymaderc.com
|
$15.76 |
FPV Camera |
Runcam Swift NTSC 600TVL DC 5-17V FOV 90° FPV Camera IR Senstive IR Block Bottom Connector
(5 builds)
Banggood.com
|
$36.99 |
FPV Transmitter |
LaForge 5.8ghz 25/200/400mw Switchable Video Transmitter
(12 builds)
Ubuyadrone.com
|
$49.99 |
Receiver |
X4R-SB - 3/16 channel, Sbus, Smart Port Receiver Without PIns
(5 builds)
Alofthobbies.com
|
$25.45 |
Batteries |
30 AMP Simonk 30A Brushless ESC firmware w / 5V 3A UBEC Quad Multirotor APM2 1G7 4894462326060
(68 builds)
Ebay.com
|
$3.62 |
Power Distribution |
Power Distribution Pro W/ Minim OSD, & Bec Pro w/ LC Filter /+5v/12v BEC
Readytoflyquads.com
|
$17.00 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
What did you use for that frame coloring?
Sharpie Oil Pens. I sanded the edges of the frame first soaked in some CA on the motor ends. Used white first then orange to get the bright orange.
That's awesome! i'm going to give this a try!