First Quad, Frame with replacements available if something breaks, FC with OSD, Camera without mount so had to buy a mounting kit as well.
Wired the camera power cables wrong at first (mixed up ground and 5V), and fried the FC instantly after plugging in (plugged in the 4s battery to test which was a mistake as well). Friend had to replace a diode on the board but now it works fine.
I'm getting also getting bad video when punching so i bought a LC filter which should solve that problem.
I'm also not very happy with that frame but what else would you expect for a 22$ bottleg. The edges are not smooth at all and i get some carbon fibre spilnters in my finger if i'm not careful, and it's a pain in the... finger to get them out.
Battery is a little bit too high (physical height). next time i should buy flatter and longer batteries.
Also i can't really mount the camera on the frame with this camera mount, so i had to stick it on with strong sticky tape until i get a better, permanent solution.
And the props are a little but more rose than the pink that was advertised.
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Hey sorry about the post issues, the website is a little glitchy right now. There is a steep learning curve in building these things, your next build will go much more smoothly. Before then, you need to build a smoke stopper:
Sorry i'm late but thanks! I got one now. I i'm using a 3A fast-acting blow fuze instead of a lightbulb though.