IFlight iX3//DYS MR1407

By buildflycrash on Sep 14, 2017

14 1,077 14

Was pretty excited to score these DYS MR1407 motors with N52 magnets. Still need to find the right prop for them but man they are good for the price. Running fine on 4s.

Photos

Part List

Frame	iFlight RACER iX3 140mm FPV Racing Quadcopter Frame Iflight-rc.com	$25.99
Flight Controller	HGLRC F3 V4 FC AIO OSD BEC PDB Current Sensor & 25/200/600mW VTX for RC Racing Drone (17 builds) Banggood.com	$39.99
ESCs	Racerstar RS20Ax4 20A 4 in 1 Blheli_S Opto ESC 2-4S Support Dshot150 Dshot300 for RC FPV Racing Drone (67 builds) Banggood.com	$27.56
Motors	4 x DYS MR1407 II 4300KV 3-4S FPV Racing Brushless Motor for RC Drone FPV Racing (7 builds) Banggood.com	$39.60
Propellers	10 Pairs Racerstar 3035PRO 3.0inch PC CW CCW 4-blade Propeller 5mm Mounting Hole (4 builds) Banggood.com	$3.99
FPV Camera	Eachine OKKAN EK1119 1100TVL 1/3 CMOS Sensor 150 Degree 2.3mm M8 Lens Tiny FPV Cam (2 builds) Banggood.com	$5.99
Antenna	Realacc Triple Feed Patch-1 5.8GHz 9.4dBi Directional Circular Polarized FPV Pagoda Antenna (4 builds) Banggood.com	$9.99
Receiver	Flysky X6B 2.4G 6CH i-BUS PPM PWM Receiver for AFHDS i10 i6s i6 i6x i4x Transmitter (180 builds) Banggood.com	$11.06
Batteries	AHTECH Infinity 4S 14.8V 1300mAh 85C Graphene LiPo Battery XT60 SY60 Support 15C Boosting Charger (28 builds) Banggood.com	$23.93
Misc Parts	Suleve™ M3AR3 10Pcs M3 35mm Knurled Standoff Aluminum Alloy Multicolor (6 builds) Banggood.com	See Site

Show stores (2)

Like Copy Part List Follow buildflycrash

Discussion

Rice_Bowl Nov 28, 2018

Whats your flight times? looks sweet~

buildflycrash Nov 29, 2018

1:30 ripping, 2:30-3:00 if you're light on the throttle

Rc Exp Jun 30, 2018

How are the 1407 4300kv holding up against crashes? I ordered a set of those and then saw that the 3600kv broke shafts if you hurt its feelings or looked at them too agressively lol but I don't think that this happens with the 4300kv. Thx😊

buildflycrash Jul 22, 2018

i haven't killed one yet and they have taken a few good hits.

FpvMaverick Sep 22, 2017

Looking good
How is the RX connected?
Are you using I-bus?

buildflycrash Sep 23, 2017

I have the RX on the top of the stack, I bus is wired to RX3 on the board. I will post some pics.

FpvMaverick Sep 23, 2017

Thanks that would be great if you could!

buildflycrash Sep 24, 2017

Sorry it took so long.

Oeliboeb Sep 14, 2017

pretty good price

Show 2 more comments

buildflycrash Sep 15, 2017

Did you design the mount yourself? I was thinking about working on something to print in TPU. \

UnderDawg Sep 16, 2017

I bought it from storm racing for my 2'' Moby frame, but after taking some measurements I think it will fit my IX3 with 30mm standoffs http://www.helipal.com/3d-printout-mount-for-moby-series-for-runcam-micro-swift.html

buildflycrash Sep 16, 2017

Nice, I will have to whip something up in Fusion360 when I get a better camera for the build. The OKKAN was horrible.

Guides & Reviews

115 22,060 40

Build a 5" Long Range Drone - Transformer Ultralight

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

69 17,609 65

Build a DJI FPV Cinewhoop - QAV-CINE Freybott Edition

Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Guides and Reviews