Had to build a winter indoor/garden flyer and this is what I ended up with!
Before building I was very sceptical about the performance especially with such tiny props, I had two brushed nano's a long while back and they were ok but but very sloppy flyers no matter how I tuned and always had terrible flight times as well as swinging larger props, But was completely blown away by how this guy handled and the power it delivered!
No prop guards but it is so locked in compared to any brushed I've flown they're barely needed indoors and with turtle mode you can almost always flip over indoors and often even in grass too.
Old batteries in video haven't received any yet
worlds smallest drone to carry a gopro? just shows how powerfully this tiny guy is!
Photos
Part List
Flight Controller |
Super_S Flytower Omnibus F3 Flight Controller Built In Betaflight OSD Dshot 6A 4 In 1 ESC BLHeli_S
(14 builds)
Banggood.com
|
$33.38 |
Motors |
4 x Eachine 1102 11500KV 1-2S Brushless Motor for Aurora 68 Mini Racing Drone
Banggood.com
|
$35.16 |
FPV Camera |
Eachine AIO FPV 5.8G 25mW 48CH VTX 600TVL CMOS 1/4 inch Camera For Aurora 90 100 Mini FPV Racer
(3 builds)
Banggood.com
|
$21.99 |
Batteries |
Giant Power 2S 300mAh 7.4V 35C Lipo Battery For Mini RC Model F3P
(2 builds)
Banggood.com
|
$5.99 |
Misc Parts |
RJX 16x16mm Micro FPV Camera Holder Protective Cover for F3 Mini STM32F3 TinyFish Racewhoop
(2 builds)
Banggood.com
|
$3.99 |
armattan productions is a carbon cutting service where you can submit your own frame designs and have the cut for a quoted price, you should check out their site https://www.armattanproductions.com/
What about a reciever? Is it already built in?
This looks like fun! Is there a frame you'd suggest from banggood? What kind of antenna is that on the VTX?
It really is a load of fun, great punch for its size! its just a whip dipole antenna I replaced with as its far more durable and lighter, I think you could use the bottom plate and possibly the prop guards if you want from this kit https://www.banggood.com/WQ65-Standard-Version-65mm-Mini-Carbon-Fiber-Frame-Kit-for-FPV-Racer-p-1138085.html?rmmds=myorder and maybe this camera mounthttps://www.banggood.com/RJX-16x16mm-Micro-FPV-Camera-Holder-Protective-Cover-for-F3-Mini-STM32F3-TinyFish-Racewhoop-p-1208574.html?rmmds=myorder
Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
i wanted to ask you about how to flash the new firmware on to the super_s F3 Fc and get it into ddu mode i dont know how to do it and i cant find any tuturials.