Catalyst Machineworks Merica 4

By Flydynamics on Oct 11, 2017

4  350  0

Catalyst Machineworks Merica 4.

Part List

Frame

Merica (4 Inch) - no canopy (8 builds)
Catalystmachineworks.com
$50.99

Flight Controller

PIKO BLX Micro Flight Controller (20x20mm Mounting) (4 builds)
Myrcmart.com
$38.99

ESCs

Ori 4-in-1 ESC 25A (20x20mm Mounting) (5 builds)
Pitchrollyaw.net
$39.99

Motors

4 x BH Tornado T1 1407-3600kv (3 builds)
Rotorquest.com
See Site

Propellers

HQ DURABLE PROP 4 x 4.3 x 3 V1S (2CW+2CCW) (3 builds)
Catalystmachineworks.com
$2.99

FPV Camera

Runcam Micro Swift (NO OSD) (199 builds)
Catalystmachineworks.com
$29.99

FPV Transmitter

Eachine VTX03 Super Mini 5.8G 72CH 0/25mW/50mw/200mW Switchable FPV Transmitter (426 builds)
Banggood.com
$12.22

Receiver

FrSky XSR 2.4GHz 16CH ACCST Receiver Board S-Bus CPPM Output Support X9D X9E X9DP X12S X Series (480 builds)
Banggood.com
$15.99

Batteries

PULSE LIPO 1050mAh 14.8V 75C
Rotorquest.com
See Site

Misc Parts

MERICA STANDARD CANOPY (MERICA 3", 4", 5", 6") (8 builds)
Catalystmachineworks.com
$15.99
Show stores (5)

Discussion

Sign in to comment

Guides & Reviews

22 1,113  11
14 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
42 4,763  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more