CMW Merica frame. Handles very well and tracks hard in the turns. Still fine tuning but almost tempted to leave it where it is as it flys so well. Props in the photo have been changed to the dal 5045c. The RK 5046 props fly well but does not suit my flying style.
Frame |
Merica 5 Inch - no canopy
(23 builds)
Catalystmachineworks.com
|
$55.99 |
Flight Controller |
Hobby Wing XROTOR F4 Flight Control System
(80 builds)
Catalystmachineworks.com
|
$25.99 |
ESCs |
Hobbywing Xrotor Micro 40A 4-in-1
(142 builds)
Catalystmachineworks.com
|
$59.99 |
Motors |
Set of 4 Brother Hobby Returner R2 Ghost Edition 2205 2555kv
(7 builds)
Rccrazed.com
|
$51.96 |
Propellers |
2 Pair DALPROP T5045C Cyclone 5 Inch 3 Blade Propeller Clover Prop Black Red Orange Green
(216 builds)
Banggood.com
|
$3.37 |
FPV Camera |
Runcam Micro Swift (NO OSD)
(192 builds)
Catalystmachineworks.com
|
$29.99 |
FPV Transmitter |
TBS UNIFY PRO 5G8 HV - RACE (SMA) 25mW - 200mW
(555 builds)
Catalystmachineworks.com
|
$24.95 |
Antenna |
True RC AXII-U.FL 5.8
(33 builds)
Pirofliprc.com
|
$19.99 |
Receiver |
FrSky XM+ Ultra Mini SBUS Receiver
(1149 builds)
Catalystmachineworks.com
|
$13.99 |
Batteries |
Thunder Power Adrenaline 1300mAh 4S 100C
(3 builds)
Rotorgeeks.com
|
$42.55 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Hi, very nice build, the FC and the ESCs are connected by the pins? Or wires? I mean the Merica is supposed to have the ESCs on the bottom and FC in the canopy that's why im asking. Thanks
Thx. I removed the pins from the FC and used the wires. The carbon top plate sits just over the female socket for the 4in1, so its not possible to use.
Thank you very much, great help and build. All the best bud.