Wanted to keep the build as clean as possible. It turned out so nice, I haven't maiden it. Just keeping it on my desk as a "Conversation piece" for now :)
Painted the canopy Tamiya TS-8 aka Italian Red.
Light, compact with high RPM motors dipped in Ferrari red. This is the quad Enzo would fly.
Build Notes:
iFlight Mini stack couldn't arm with 32khz Gyro was installed. Had to use 8kh/8khz. Was using Betaflight 3.2. RC 5 and will try with the final version soon.
Frame |
Spintech Race-1 Micro Quadcopter Frame
(7 builds)
Spintechmotors.com
|
$36.00 |
Flight Controller |
iFlight Mini Revobee32 F4 32K FPV Flight Tower System 18A ESC
(4 builds)
Airbladeuav.com
|
$79.99 |
Motors |
4 x 1106ST 8000kV Brushless Motor
(10 builds)
Spintechmotors.com
|
$30.00 |
Propellers |
RotorX RX 2535 Props (8 CW & 8 CCW)
(27 builds)
Airbladeuav.com
|
$7.98 |
FPV Camera |
RunCam Micro Swift 2 FPV Camera CCD
(282 builds)
Airbladeuav.com
|
$34.99 |
FPV Transmitter |
Runcam TX25 5.8G 48CH 25mw Video Transmitter for Micro Swift Micro Swift 2 Micro Sparrow
(7 builds)
Banggood.com
|
$12.99 |
Receiver |
Flysky FS-A8S FS A8S V2 2.4G 8CH Mini Receiver with PPM i-BUS SBUS Output
(91 builds)
Banggood.com
|
$9.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
New Message for furiouspug