A new little crew just join my collection.
I really surprise how stable it is, very easy in tuning, it just fly so well. The cheapest stack I ever bought from banggood Super_S F4 $28. The stack is soft mounted by 3 layer double side tape under ESC and a bit of soft foam between ESC and FC
Again I serious suggest this buzzer, I sound very loud. It save my quads a lot of times https://goo.gl/Vf3p63
Notice:
- Need to add some SMD caps as near as the power pad of ESC for get clear video
- The Super_s F4 stack only support 0.5 A bec not enought power for XM+, VTX03 . So I added 1A step down for serving VTX, camera and buzzer
- Softmount the 4 in 1 esc to the frame with at least 3 layers
- Put some very soft foam between FC and ESC and only connect them by 2 screws but not all 4 and don't tie hard leave a very small gap so they can absorb the micro vibration => this might only be true for small build and not very strong motor
- Don't let anything touch the FC on above leave some room for it even 0.5 mm
Parts list:
- Frame X2 ELF 88mm : https://goo.gl/BZiQVV
- Flight Controller Super_S F4 2S : https://goo.gl/21WxJE
- Motor Racerstar 1103 10000kv https://goo.gl/FSdX1X
- Propellers https://goo.gl/XhVMnK
- FPV Camera https://goo.gl/i5nSZ3
- FPV Transmitter https://goo.gl/DVt23k
- Receiver https://goo.gl/VSMJqx
- Micro DC-DC Converter Step Down https://goo.gl/wLzQtw
- Super loud Buzzer https://goo.gl/Vf3p63
**Update:
- upgrade the motor to RCX 1103 78000kv, Amazing!!!
- change ESC to Racerstar 6A 16x16mm. Fpv feed very clear, don't need cap anymore https://goo.gl/8zjhq1
Flight video
Updated: Having improvement for X2 ELF 88mm buid, Swapped Hulkie prop to Gemfan 4 blade 2035, most of fpv noise and vibration at top speed disappear
**Update:
- upgrade the motor to RCX 1103 78000kv, Amazing!!!
- change ESC to Racerstar 6A 16x16mm https://goo.gl/8zjhq1
Photos
Just curious, what's the step down converter for?
The Super_s F4 only support bec 0.5 A not enought power for XM+, VTX03. So I added 1A step down for serving VTX, camera and buzzer (buzzer also need 5 v)
Ah, thanks, that's good to know! I have a spare ATX03 and XM+ and will be copying your build. Let me know if you have any pointers or things you would have done differently.
There're notice about how to get clear video. you need to add some small cap near the power pad of ESC, Please check the photo quad on scale for this. I get the caps from some old boards, or you can strip down some caps from the caps board in the list above, use the whole boards add more weight and require more space. These caps is special for suppress electric noise, and also there're a few trick in softmount the ESC, FC... when build:
Having improvement for X2 ELF 88mm buid, Swapped Hulkie prop to Gemfan 4 blade 2035, most of fpv noise and vibration at top speed disappear
I think I am in the same position as you are at this point. I am not sure exactly what you actually did with the step down. My board reacts and operates well in Betaflight but will not "come to life" on battery power alone. Do I need to send power directly to the FC beyond the 6 pin connector/
HI Rhygin. Here is how i connect things together:
But if you cannot power the FC via standard provided cable you should take a short video and open a ticket send to after sale support they will take care for you. After that you can try to revive the board ^_^
Why I need the step down. It's because the FC bec only 0.5 mAh it cannot work stable for the whole system especially I use VTX03. So the Step down would responsible in provide power for VTX and camera.
I connect camera to VTX03 out put because the VTX03 has filter too and I think I got more clean video.
Awesome... totally got it! Much thanks!