By aiden.sinclair on Jul 11, 2016

2  42  0

My first 4s build. I'm really happy with it. The THuG frame holds up to anything that I throw it at (I really recommend it). The batteries get kind of warm after a good run, but that's expected. There's loads of room to build, mainly due to the shelf that gives you space to mount your vtx. You can fit an FrSky XSR receiver under the THuG PDB that's included with the frame, but you have to cut the heat shrink around the bind button, because if you don't there's not quite enough room, and the receiver is constantly in bind mode because the button is always pressed. I'm very impressed with the quality of the THuG frame.

Part List


Oops! That page can’t be found.

Flight Controller

Naze 32 Acro Rev 6 Mini Flight Controller


4 x Rotorgeeks RG20 ESC (3 builds)


4 x Cobra CM2204/28 2300kv Brushless Motor


Oops! That page can’t be found.

FPV Camera

Mini 700tvl 1/3 CMOS Camera with Super WDR (3 builds)

FPV Transmitter

Eachine Falcon 180 250 250 Pro FT200 5.8G 40CH 200mW FPV Transmitter Without Antenna (3 builds)


Turnigy nano-tech 1000mAh 4S 45~90C Lipo Pack (7 builds)
Show stores (7)


Sign in to comment

Guides & Reviews

22 5,356  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more
3 4,818  13
Sep 18, 2019

When the FatShark HDOs hit the market in 2018 the FPV community rejoiced for the new Sony OLED displays. While they lacked further upgrades like an updated DVR and power button they were still a market success. With the 2019 announcement of the Orqa FPV.One the community finally had a potential HDO killer on the horizon. With only weeks before the release of the Orqa FPV.One Skyzone came out of left..

Read more