All electronic Parts are coatet with Latexpaint and are now waterproof for Fly in the Winter!
Frame |
FPVracing.ch
Fpvracing.ch
|
$74.00 |
Flight Controller |
KISS FC - 32bit Flight Controller V1.03
(178 builds)
Flyduino.net
|
$34.00 |
ESCs |
4 x KISS ESC 2-5S 24A race edition - 32bit brushless motor ctrl
(122 builds)
Flyduino.net
|
$88.00 |
Motors |
4 x TBS Mr Steele 2345kv SILK
(45 builds)
Team-blacksheep.com
|
$87.80 |
Propellers |
EMAX Avan R Tri Blade 5 Inch Propellers (CW/CCW) 5 Packs (20 Pieces)
(3 builds)
Phaserfpv.com.au
|
See Site |
FPV Camera |
FPVracing.ch
(4 builds)
Fpvracing.ch
|
$42.00 |
FPV Transmitter |
ImmersionRC Tramp 2-6S HV 25-600mW 5.8GHz VTX (US Version) - U.FL
(52 builds)
Racedayquads.com
|
$29.99 |
Antenna |
Lumenier AXII U.FL 5.8GHz Antenna (RHCP)
(148 builds)
Getfpv.com
|
$14.99 |
Receiver |
FrSKY XSR Micro Receiver
(480 builds)
Rotorgeeks.com
|
$20.24 |
Batteries |
Thunder Power Adrenaline 1300mAh 4S 100C
(3 builds)
Rotorgeeks.com
|
$42.55 |
Power Distribution |
Mr Steele Alien PDB Kit for KISS with OSD and Mic
(4 builds)
Impulserc.com
|
$61.00 |
HD Camera |
GoPro HERO5 Session
(303 builds)
Getfpv.com
|
$199.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
How is that axii antenna holding up in crashes. Considering that it connected to the tiny u.fl connector and is sticking far out of the back in your build?
Hi yes its u.fl Connnector i have simply the standard TPU ANTENNA Holder of this Frame used no Modidfication neded!
I ad a foto for You
thx for the answer and the photo. did you shrink wrap the wire of the antenna to make it stiffer?
Yes 2 heatshrink Tubes