The picture with it stripped and sitting on top of the flight controller is its final configuration. The one with the blue tubes holding the antennas on the ESCs. I have had to take it apart again and coat it in liquid electrical tape and the bottom is thoroughly covered with double sided tape but it works. My first Satellite got fried by the vtx channel button gouging it so it took a few extra tries.

As long as the antennas arent deep inside carbon you should be fine. The only one Ive had problems with signal loss is the Wasp and all it took was pulling the antennas out of the top plate to solve that problem. If you decase it be sure to coat and cover it in something as they are quite fragile.

Well Ive broken the top plate three times and glued it back, the m2 stand offs are kinda meh but they work alright. My biggest problem is the damn cameras. I listed three because Ive broken three already. Granted they were really hard hits. Same for the LEDs