A (very) tiny brushless setup.
Dry weight is 39.2g, AUW is 53.2g. Hovers around 70-75% throttle and is fairly stable in horizon mode. Acro has some sort of issue with max throttle dropping the quad to the ground.
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Hello !
I am building one myself and I want to know something...
Since you didn't use the DIY kit from FlexRC (unless I'm wrong...)
What hardware do you use for screws and spacer to stack everything up ? (Fc, Esc's, Frame...)
Thanks !
(Sorry for my imperfect english...)
I want to say that the ESC and FC stack came with some hardware, and the rest I used from M2 standoff and spacer kits I got from Amazon.
Thank you for your answer ! Can you give me a link to this kit ? Or maybe what dimension of spacer to take ?
Thanks again !
Any kit with a bunch of M2 bolts and M2 nuts/spacers will have a variety of them. Not sure what country you're in so I don't want to link you to the correct thing and have it not actually be available to you :)
I'm French x) but ok I get it, I will buy a kit like this :)
Thanks anyway !