Comp 108 Printed 2.5" Rat Quad

By MaximusFPV on Dec 03, 2017

2  145  0

SO I MADE A RAT QUAD
Had these 1105B from my very first BL build EVER early last summer... decided to whip em out for a third time (also used on a BQE Mini Pixel before this) as well as some other parts I had and soon enough I had this beast. Props are a tad brittle but I have about 4 dozen free thanks to Kenny at Air Arsenal. I actually really enjoy this one. Because it cost me exactly zero dollars, I do crazy stunts with this that I'd never risk with the Rip or anything else I spent actual money on. Pretty quick, too. Camera mount is my own design, printed in Sainsmart black TPU here but originally in white ABS.

Photos

Discussion

Sign in to comment

Guides & Reviews

26 1,246  11
17 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
42 4,828  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more