Biggest problem is fitting the build itself. The props travel over, right over, maybe 1mm clearance between prop and esc/FC connector. Have to glue the camera wires away from props, it's crazy tight. Used a nylon nut sandwich for each board on a long m2.5 bolt cause you cant get the esc low enough using spacers. Have to remove motor to connect us, but I did find a 90deg elbow adapter that I was able to carve up to get to fit, with some effort. Possible to use a motor standoff to help with fit???
Would take more pictures but I lost it in the river. Rip "Dragon Wasp".
Next build will use motors with prop screws.
Photos
Part List
Show stores (5)
Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Nice build! I think I might build one with dys 1102 and 1s whoop batts.
This esc/FC is 2,3 cell only. 1 won't uen it on just FYI.
I am gonna use a different fc stack. Lumineir tinyFish