SplitShark - 3" w/RunCam Split [SOLD]

By LawnDart on Jan 06, 2018

5  452  5

Spent more time getting the 3D printed parts the right size than building the actual quad.

Raining out so no flight footage yet. :(

3D Printed Parts:
Booties - https://www.thingiverse.com/thing:2642313
30.5mm to 20mm Adapter - https://www.thingiverse.com/thing:2638475

Photos

Part List

Frame

Splitshark (9 builds)
Falconmultirotors.com
$35.00

Flight Controller

HGLRC F4 Zeus AIO 15A BLHeli_S Flight Controller (4 builds)
Getfpv.com
$70.99

Motors

4 x EMAX RS1106 Micro Brushless Motor
Progressiverc.com
$51.96

Propellers

DYS 3x2 Props x 8 – MultiRotorMania
Multirotormania.com
$1.99

FPV Camera

RunCam Split 2 HD/FPV Camera with Wifi Module and GoPro Quality Lens (81 builds)
Getfpv.com
$79.99

FPV Transmitter

Eachine VTX03 Super Mini 5.8G 72CH 0/25mW/50mw/200mW Switchable FPV Transmitter (426 builds)
Airbladeuav.com
$14.99

Receiver

FrSky XM+ SBUS Mini Receiver (1423 builds)
Progressiverc.com
$13.99

Batteries

Tattu 3S 650mAh 75C Lipo Battery
Fpvheadquarters.com
$12.29

Radio

FrSky Horus X10 Radio (Amber)
Getfpv.com
$375.99

Goggles

DJI Digital FPV Goggles - Ultra Low Latency 720p 120FPS Digital HD (86 builds)
Racedayquads.com
$529.00

HD Camera

GoPro Hero5 Session (267 builds)
Amazon.com
$299.99

Radio Module

TBS Crossfire TX (10 builds)
Rotorvillage.ca
$264.99

Battery Charger

ISDT Q6 Plus 300W 14A MINI Pocket Battery Balance Charger (57 builds)
Banggood.com
$59.99

Soldering Iron

Weller WESD51 Digital Soldering Station
Amazon.com
See Site

Backpack

Lowepro QuadGuard BP X3 - Drone Backpack for 4 FPV Quad Racing Drones and 15" Laptop w/Exterior Mounts (Black) (24 builds)
Amazon.com
$286.00
Show stores (10)

Discussion

Sign in to comment

vaportrail123   Mar 06, 2018  
1

it's not retired, i just bought it from him:

LawnDart   Mar 06, 2018 

Ha, I should mark it sold. Good point.

Rakinroul   Jan 15, 2018  
1

This frame is not desinget to not have props in camera ,-)

inkan   Jan 07, 2018  

do the propellers show in frame when recording video ?

LawnDart   Jan 08, 2018 

A bit with the angle I initially flew on. I uploaded a framegrab from a video to show it. I don't think you'll be able to totally eliminate the props from view, but I'm going to try a steeper angle the next time I fly.

Guides & Reviews

28 1,450  11
22 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
44 4,945  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more