Hey guys. I wanna show you my new ImpulseRC Reverb "Black Edition". Equipped with a Sunrise F4 AIO with 30A BLHeli_32 ESCs and OSD - all in one Piece. Motors are RotorRiot HypeTrains with 2450KV. I totally fell in love with the hype trains. Super smooth and powerful. My FPV Setup is as always a TBS Unify Pro HV-Race equipped with a TBS Triumph and the new Rotor Riot Swift2 Camera. If you want further information of my build you can check Rotorjunkies ImpulseRC Reverb Build
Photos
Part List
Frame |
ImpulseRC Reverb 5" FPV Frame Set (PDB schwarz)
(18 builds)
Flyingmachines.de
|
See Site |
Flight Controller |
Sunrise F4 AIO FC BLHeli_32 30A
Flyingmachines.de
|
See Site |
Motors |
Rotor Riot Hypetrain Freestyle Motoren 2306 2450KV
(96 builds)
Flyingmachines.de
|
See Site |
Propellers |
HQ 4x4.3x3 V1S (2CW+2CCW) PC **Choose Color**
(48 builds)
Pirofliprc.com
|
$2.99 |
FPV Camera |
Camera
(93 builds)
Rotorriot.com
|
$26.99 |
FPV Transmitter |
TBS Unify Pro 5.8Ghz HV-Race (Pigtail-SMA) 25mW
(3 builds)
Flyingmachines.de
|
See Site |
Antenna |
TBS Triumph Antenne SMA (2 St.)
Flyingmachines.de
|
See Site |
Receiver |
FrSky XSR 2.4GHz 16CH ACCST Receiver w/ S-Bus & CPPM
(480 builds)
Getfpv.com
|
See Site |
Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Nice build, super clean. I'm looking at doing the Reverb frame as well for my first build. I have some different components from what you picked but I think what I'm looking at will work. If you could build this again would you have done anything differently?