Tiny Whoop DS
By droneslinger on Jan 19, 2018
Tiny Whoop Droneslinger edition. FlySky protocol. Special thanks to Jesse P. for the hookup on the Frame, Motors, Canopy, and Cam/VTX combo.
Photos
Part List
Show stores (6)Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Hey man- I want to do the mullet mod to my FX805-OSD but can't seem to find a pinout or clear picture of the wiring anywhere online. Any chance you could add a picture that shows how the cam is wired to the VTx (or just describe which pins need to be replaced with wires and which ones are just structural)? Many thanks!
So the Beecore has an OSD, so I have a third place to solder on my setup. Here's some pics of all the solder points, though. Hope you can figure out what you need from them =)